Agitators

Agitators

Tempered orbital shakers for the MultiPurposeSampler MPS. Cooled, stirred or shaken.

Functional principle of the Agitators

The MPS transports the samples into the Agitator, where they are heated and shaken. Heating and shaking are performed in a time-controlled manner. The temperature and speed involved can be set individually. The Agitator is sealed using a cap. If necessary, the MPS can insert a needle into the vial through the openings in the cap. The Agitator can be used with 2-mL, 4-mL, 10-mL, 20-mL and 40-mL vials.

Agitator

The Agitator is a heated orbital shaker for the MultiPurposeSampler MPS.


It enables up to 6 samples to be heated and shaken at the same time. The shaking step is a fixed component of a headspace or SPME run. You can also use the shaking step as part of the automated sample preparation process, however.

The system is controlled using the MAESTRO software. Within the software itself, all preparation steps can be prepped ahead to save time.

Agitator
AgitatorStirrer

AgitatorStirrer

The Agitator Stirrer is a heated orbital shaker for the MultiPurposeSampler MPS. It can either be used in shaking or stirring mode.


It enables up to 6 samples to be heated and mixed at the same time. The system is controlled using the MAESTRO software. Within the software itself, all preparation steps can be prepped ahead to save time. The mixing step is a fixed component of a headspace or SPME run. You can also use the mixing step as part of the automated sample preparation process, however.

CooledAgitator

The Cooled Agitator is an orbital shaker for the MultiPurposeSampler MPS. It enables up to 6 samples to be tempered and shaken at the same time.


As it is fitted with a cooling device, the Cooled Agitator also reaches temperatures below room temperature. The system is controlled using the MAESTRO software. Within the software itself, all preparation steps can be prepped ahead to save time.

The shaking step is a fixed component of a headspace or SPME run. You can also use the shaking step as part of the automated sample preparation process, however.


CooledAgitator
Motion 40

Motion 40

The Motion 40 option allows a heated orbital shaker to be integrated as part of the automatic sample preparation process using the MultiPurposeSampler MPS.


The orbital shaker can heat and shake up to 4 samples at the same time. The shaking step is a fixed component of a headspace or SPME run. You can also use the shaking step as part of the automated sample preparation process, however. The system is controlled using the MAESTRO software. Within the software itself, all preparation steps can be prepped ahead to save time.

Vorteile

Depending on the version, samples can be heated, cooled and shaken during automated sample preparation, for purposes such as incubation or following the addition of reagents.


Thanks to the MAESTRO software, controlling the system as a whole is simple and intuitive.

All information also for download